HYPER-G

Most vessels run their cellular router below deck because it is convenient to access and easy to plug into the existing network. The antennas then sit high on the mast, tied to the router with long RF cables.

Those long cables quietly kill performance. Every metre adds attenuation. The gain of the antenna is eaten by cable loss, so you end up with poorer reception, slower speeds, higher latency, and a much smaller usable range than the theoretical “bars” suggest.

At the same time, omnidirectional antennas radiate like a flat donut. The more gain you add, the flatter and narrower that donut becomes. On a moving ship, that narrow vertical beam will happily overshoot or undershoot the cellular tower as the vessel pitches and rolls. Even in flat rivers or lakes, towers placed on hills or high ground often sit outside the sweet spot of the omni pattern.

The result: unstable connections, frequent drops, and crews complaining that the internet “just dies” as soon as you sail a bit further out.

To achieve optimal connectivity without outages the Hyper-G is equipped with an array of directional antennas for seamless 360° coverage but it also allows the simultaneous use of multiple modems resulting in higher and more stable throughput.

An additional benefit of directional antennas is that it will connect to the best possible Cellular Tower within its 60° sweet spot. This prevents having your own cellular modem compete with eacht other for bandwidth on the same Cellular Tower.

The combination of Directional Antennas and multiple modems is a drastic improvement over omnidirectional antennas especially when transmitting/uploading data at high speed is required.

Hyper-G units come in a bonded or balanced version. Depending on your requirements: unbreakable connectivity, single session / large file transfers you can choose between a bonded solution which will combine all modems to a single and more stable connection, or a load balanced version that will distribute the available connections to your devices individually

SYSTEM HIGHLIGHTS

• 36 Custom designed high gain antennas outperforming any omnidirectional solution available on the market
• Wide elevation for long distance performance on moving vessels
• Selects up to 6 individual LTE connections based on performance and availability
• Available in LTE, LTE-A and LTE-A-Pro version
• No signal loss due to long RF cable runs
• Single coaxial or Power / Data connection

SERVICE HIGHLIGHTS

• Fully pre-configured unit includes activated SIM cards
• No on board configuration required.
• Drop in solution when replacing existing coax based systems
• Customized configuration available Remote performance monitoring

MODEM OPTIONS

• LTE, LTE-A, LTE-A-PRO
• CAT 4, CAT 6, CAT 11, CAT 18 combinations
• Regional
• Global

BDU-ADU CONNECTION OPTIONS

• Single Coax (up to 1 Gbps)
• Power + RJ45 (1 Gbps up to 2.5 Gbps)
• Power + Fibre (> 2.5 Gbps)

DATA DISTRIBUTION OPTIONS

• Load balanced
• Bonded

FORM FACTOR

• Desktop
• Rack Mounted